Development of High Density Mini Point-of-Load dc-dc Converter by FDK
FDK leading Japanese and global electronic component and battery manufacturer made an announcement on development of yet another non-isolated, point-of-load (POL) dc-dc converter with a low profile single in-line (SIP) package. The newly developed FPDK12TR8006PSV dc-dc converter is capable of delivering up to 6 Amperes of output current at a power density of over 950 Watts per cubic inch. The newly developed converter has an efficiency of 93% plus it provides a complete power conversion solution without any needs for external input and output capacitors. This new product with in the FDK’s DK Series product is designed to be used in various applications such as telecom, datacom, computing, industrial as well as consumer application where there is a demand for board space saving, smaller profile, higher efficiency, and low overall product cost. The new converters are ideal in such applications where reliable operations in high thermal environments are critical. The new converter comes in a (10.0 x 5.6mm) SIP package with a height of 12.0mm. The onboard footprint of the new FPDK12TR8006PSV is less than 0.6 square centimeters which make it ideal for high density racks, blade systems and consumer applications with limited board-to-board and board-to-case clearances. The FPDK12TR8006PSV operates from 5.6Vdc to 14.0Vdc input providing a tightly programmable output voltage with in the range of 0.8Vdc to 6.6Vdc. Furthermore, the newly developed FPDK12TR8006PSV comes with programmable output voltage, remote ON/OFF, over-temperature protection as well as start-up into a pre-biased output.
source
Comments
3 Responses to “Development of High Density Mini Point-of-Load dc-dc Converter by FDK”
[...] response. In response to these needs, Fujitsu Microelectronics has developed a new two-channel DC/DC converter IC capable of fast transient response targeted to be used in digital consumer electronics. The [...]
[...] FDK made an announcement on development of what company claims to be the world’s smallest low pass filter. The newly developed AMF1005L series of low-pass filters are made with dielectric ceramic materials based on FDK’s know how to fully optimize the multilayer patterns, low temperature sintering technology as well as company’s knowledge and experience in designing and manufacturing multilayer chip inductors. The new AMF1005L in comparison to discrete devices such as inductors, condensers and resistors on a circuit board takes only about one-eighth the footprint making it possible to simplify a circuit design and at the same time save mounting space and cost. The new AMF1005L is ideal noise reduction filters for high frequency circuits which are found in mobile phones, digital television tuners, wireless modules and etc. Share and Enjoy: [...]
[...] development of a new series of Voltage Regulator Module (VRM). The newly developed FPVR12CR50130PA dc-dc converter has been designed to meet the power needs of high end microprocessors and other related devices [...]