TDK-EPC Introduces the World’s First Component with Common-Mode and Differential Mode Noise Suppression
TDK-EPC has announced the development of world’s first common-mode filter that combines common-mode noise suppression and GSM band differential noise suppression all in a single component. The newly developed TDK TCD0806B-350-2P common-mode filter has been designed specifically for high-speed differential transmission on MIPI lines in smartphones, conventional mobile phones as well as other type of mobile devices. The dual noise suppression capability was made possible through proprietary thin-film circuit and material technologies, where in GSM band of 800 MHz would result in significant improvement in reception sensitivity for smartphones and other mobile phones. Read more
Release of Bluetooth Low Energy Compliant Communication Module by SMK
SMK has announced the release of a new communication module which is compatible with Bluetooth® Low Energy single mode, providing a low power consumption wireless communication. Bluetooth Low Energy (BLE) technology is a feature of Bluetooth Version 4.0 which consumes less power than the standard Bluetooth technology. The module is able to communicate with equipments compatible with Bluetooth Ver. 4.0 dual mode as well as BLE single mode equipment. The low power consumption of the module makes it possible to embed it into the equipment operable by coin battery. Read more
Mitsumi Roles out World’s First Power Line Communication Compliant Module
Mitsumi Electric has announced the release of world’s first Power Line Communication (PLC) module. The new DRT-J520 HD-PLC module can easily be mounted in broad range of equipment specified by IEEE 1901 international standards. The new DRT-J520 module has a logical communication speed of 240 Mbps and a low power consumption of approximately 1.3 W. This compact module of 70 x 27 x 8.4 mm dimension is ideal for embedded applications, where it can change setting without any needs for a PC. Read more
Construction of World’s Largest Solar Bridge Based on High-Efficiency Solar Modules by Sanyo
This Victorian bridge built in 1886 is getting a high-tech facelift. The bridge which is the foundation for the new Blackfriars station is being upgraded by Network Rail to cater for more commuters and at the same time to improve its train services. The upgrade is a new roof which will incorporate over 6,000 square meters of Sanyo’s HIT solar modules, creating the biggest solar array in London. Read more
Sanyo Roles out its Newly Improved “eneloop” Batteries
Sanyo announced the release of its newly improved “eneloop” rechargeable batteries, since its first introduction in the market back in November 2005. The improvement comes as the new batteries can still preserve 70% of its power after 5 years of storage. In addition to this then new eneloop batteries can be recharge approximately 1,800 times in comparison to the previous model which recorder a 1,500 times, an improvement of 20%. Read more
Development of World’s First Fieldscopes with Lens-Shift-Type VR Function
Nikon Vision, a subsidiary of Nikon has announced the development of EDG Fieldscopes 85 VR and 85-A VR, a world’s first fieldscopes that incorporates the lens-shift type VR function. In addition to this, the vibration reduction algorithm based on company’s VR mechanism which has been incorporated in NIKKOR VR lenses, has been optimized for the newly developed fieldscopes. The VR functions will help the fieldscopes to accurately compensate external vibrations caused by wind as well as enabling operations such as focusing, panning and tilting. Furthermore, the VR function will make the composition simple by reducing vibrations by around 1/8 of image blur which is normally occurs during normal observation. Plus it enhances focusing accuracy even when manual focus is being used during super-telephoto digiscoping. Read more
Development of World’s First Micro SD Card with Embedded Wireless LAN and Bluetooth Module
In respond to market demand for multi-standard wireless modules, Mitsumi Electric has developed industry first Micro SD card with embedded wireless LAN (IEE802.11 b/g/n) and Bluetooth (3.0+HS) module. The new solution will bring the capability data transfer for devices that are not equipped with a wireless standard. The new Micro SD card is equipped with a built-in common antenna inside the card (DWM-W061). The new card Wireless LAN function has send-receive frequency of 2.412 to 2.472 GHz, offering the maximum transmission speed of 150 Mbps (802.11n, MCS7 40 MHz channel). It has the current consumption of 270mA during the transmission, 160mA during reception and 0.5 mA during standby. Read more
Development of ICC 4K LCD TV featuring Four times the Resolution of Full HD LCD TVs
Sharp and I-Cube Research Center Inc, has announced a joint development of a prototype of a Sharp and I-Cube Research Center featuring quad high-definition resolution (3,840 x 2,160 pixels), four times the resolution of current full HD 1080p TV signals. The newly developed prototype will integrate ICC visual creation technology from I-cubed and LCD technology developed by Sharp for AQUOS TVs. The new signaling technology along with panel control technology is capable of producing the “cognitive” process by which human brain interprets light stimuli as natural scenery, providing viewer with a new visual experience. Read more
Development of Industry’s First Field-Coupled Wireless Power Transmission Module for Wireless Recharging of Mobile Devices
Murata Manufacturing has announced the development of world’s first field-coupled wireless power transmission module capable of wireless charging of tablet PCs as well as other type of mobile devices. The field-couple system works by positioning electrodes at the power-sending and power-receiving ends and transmitting energy using the electrical fields generated between these electrodes.
The new LXWS series provides wireless power transmission of 10 W through use of the power-sending and power-receiving set. Read more
Development of a New Series of Protective Overcoat giving Printhead More Corrosion Resistance Quality
Kyocera has announced the released of new KC-50 Series of protective overcoat for thermal printhead, helping to improve the corrosion resistance of the printhead by 6 times while providing a more energy efficient and higher print quality. The protective overcoat layer is approximately 15% thinner than conventional overcoat and distance between the heat source and print media is shortened, resulting in reduced heat requirements and increased energy efficiency. The improved heat transfer would result in increased print accuracy by one symbol grade (Quality standard based on “ANSI X3.182”Bar Code Print Quality Guideline), even at high print speeds, resulting in higher quality print. Read more
